My swap for Telford changed at least 3 times! I was just SO indecisive. I finally decided on a 1″ inch box with a rose on top. Here is how I made it 🙂
Step 1: I used the Blossom punch and the 3/4 inch circle punch. I punched 3 flowers with the blossom punch.
Step 2: I then punched a hole in each flower. I used two opposite petals to centralise the hole.
Step 3: Cut the flowers as below.
Step 4: Leave one blossom flat and roll the others up as below. I used Tombo glue to make it stick.
Step 5: Place a big blob of hot glue on a silicon sheet. Place the 3 bigger flowers in the glue.
Step 6: Add more glue into the center and place the remaining two petals into the center. Add more glue to the bottom and stick where desired.
Step 7: You can leave plain or use a spritzer to add colour!